Bag breaker machine shutdown maintenance: Long term storage processing specifications

The handling specifications for long-term storage of bag breaker machines should comprehensively consider the preparation before equipment storage, maintenance during storage, and inspection and maintenance after opening. The specific specifications are as follows:

1. Preparation before sealing:

-Comprehensive maintenance: Before sealing, the bag breaker machine should be thoroughly maintained, including cleaning the equipment surface, draining liquids (such as coolant, oil, etc.), and ensuring that the equipment is in good condition.

-Oil coating and rust prevention: Apply rust prevention oil to the guide rails, smooth surfaces, and other parts of the equipment that may rust to prevent rusting.

-Dust and Moisture Prevention: Equipment should be equipped with dust and moisture prevention measures, such as covering with dust covers or sealed packaging, to avoid damage to the equipment from external environments.

-Cut off power: Turn off the device power and disconnect the electrical fuse or knife switch to ensure that the device completely stops running.

-Record and approval: Fill out the "Equipment Sealing Form", submit an application by the user unit, and only after approval by relevant departments can the sealing procedures be processed.

2. Management during the sealing period:

-Dedicated person in charge: Designate a dedicated person to be responsible for the storage of sealed equipment, ensuring that the equipment is in good condition and not dismantled or used without approval.

-Regular inspection: At least once every two weeks, check whether the dust cover is intact and whether the internal and various components of the equipment are in good condition.

-If necessary, start up and run the device: If the device has been stored for a long time (such as more than 6 months), it should be regularly started up and run to ensure that the mechanical performance does not decrease.

3. Inspection and maintenance after opening:

-Recheck the equipment status: When unsealing, a comprehensive inspection of the equipment, including lubrication system, cooling system, electrical connections, etc., must be conducted to confirm that there are no abnormalities before it can be put back into use.

-Supplement fluids: Re inject oil, water, gas, etc. to ensure proper lubrication of all components of the equipment.

-Trial operation: After opening, conduct a trial operation to ensure that the equipment is running normally and record the trial operation situation.

4. Other precautions:

-Corrosion prevention: Avoid using corrosive liquids to clean equipment to prevent damage.

-Storage environment: The equipment should be stored in a dry and ventilated place, avoiding direct sunlight and humid environments.

-Scrap condition: If the equipment has been idle for too long and cannot be repaired or its technical performance cannot meet the requirements, it should be scrapped in a timely manner.

In summary, the handling specifications for the long-term storage of bag breaker machines must be strictly followed according to the above steps to ensure that the equipment can maintain good technical condition and be put into use at any time after a long period of disuse.